Deep cleaning and post-laying cleaning of Porcelain Stoneware
The following system for the deep cleaning of porcelain stoneware is an effective solution for treating porcelain tiles that have just been installed or have persistent stains and stubborn dirt. Thanks to its specific formula, it enables extraordinary cleaning of porcelain stoneware, ideal when routine maintenance is not enough.
More details:
This method removes stains visible against the light, eliminates halos and fights dirt caused by inadequate cleaning. It is also essential after floor installation, when residues of cement, glue or other materials compromise the appearance of surfaces. For this reason, it is strongly recommended for post-site cleaning, ensuring a clean porcelain tile with no traces of workmanship.
This deep cleaning of porcelain stoneware removes surface patinas that build up over time. These layers retain dirt and react to acidic or alkaline substances found in everyday products. As a result, stoneware is easily stained by contact with descaling agents, carbonated beverages, wine, sparkling wine, lemon, vomit and urine.
If the floor is not treated properly, it appears dirty and has stains that are difficult to remove. An extraordinary cleaning system for porcelain tile solves this problem, restoring the surface to its original appearance and simplifying maintenance.
After this treatment, porcelain stoneware shines again. Dirt accumulates less and cleaning becomes easier. For maximum results, it is important to follow the instructions for use and choose specific products for extraordinary cleaning of porcelain stoneware.
The product:
To find out all the features of POWER DET we suggest you visit the page on our website. There you will find all the information about the product’s features and use.
Where and when
Where:
- On all types of porcelain floors: matte, glossy, non-slip, lapped, etc.
When:
- AFTER LAYING
-
- After laying porcelain stoneware floors, it removes resinous patinas due to the manufacturer and the laying process, site dirt, limestone, mortars and grouts, even colored ones.
- Professional correction of improperly performed post-site cleaning results, ensuring a final result that lives up to expectations.
-
- FOR STAIN REMOVING CLEANING
-
- The stain removing deep cleaning system: an advanced solution for restoring porcelain stoneware compromised by stains and stubborn dirt.
- Effective removal of stains visible against the light, ensuring a flawless surface even in the most critical lighting conditions.
- Permanent removal of persistent halos, restoring porcelain stoneware to its original uniformity.
- Resolving treatment for stubborn dirt caused by inadequate maintenance, giving neglected surfaces a second chance.
- Thorough removal of surface patinas that have accumulated over time, restoring porcelain stoneware to its original state and eliminating halos and opaque stains visible against the light due to acid/alkaline substances commonly found in our homes, e.g., urine, vomit, carbonated beverages, dirt from footsteps, food, and descaling agents.
- Restoring the original appearance of porcelain stoneware, greatly facilitating future maintenance and preserving the aesthetic value of the surface in the long term.
-
Frequency of use:
- For a one-off deep cleaning.
VIDEO TUTORIAL – In case of extraordinary cleaning, dilute POWER DET 30% to 50% as stated on the label.
Performance and consumption
- is a concentrated detergent for after-laying or extraordinary stain-removing cleaning of polished, lapped and matte porcelain stoneware surfaces;
- is recommended for extraordinary stain-removing cleaning of heavily stained and haloed porcelain stoneware surfaces;
- degreases, de-greases and removes patinas and substances from external contamination (grease, detergents, limestone) due to improper maintenance or incorrect after-laying cleaning, restoring stoneware to its original state;
- is recommended for cleaning newly laid porcelain stoneware floors; deeply removes cement grouts, paints, site dirt, production and laying patinas, mortars and grouts, including colored ones.
After laying cleaning of porcelain stoneware
- POWER DET Puro, for post-construction cleaning: to remove patinas, construction site dirt and consistent, stubborn grout residue.
How to use the product:
- Spread POWER DET generously with cloth on the surface;
- Work 4-5 square meters at a time;
- Allow at least 10 minutes and do not let the product dry on the surface;
- Rub the surface with blue plastic fiber discs or pads;
- Pick up dirt residue and product with a microfiber cloth or vacuum cleaner;
- Finally, rinse 2 or 3 times with clean water until product and dirt are removed from the surface;
- Repeat application if necessary.
For the maintenance over time of surfaces cleaned with POWER DET, it is recommended to use the ordinary cleaning products GRES LINDO and GRES BRILL.
Yield:
- as a post-construction descaling cleaning: 1lt / 15-20 sq. m;
Prodotti e accessori
POWER DET
Specific detergent for porcelain tiles for extraordinary cleaning to remove halos, stains, and any laying residues. It brings the material back to its original appearance.
BLUE BUFFER PAD | Light Abrasion
Polyester fibre pad to use for the removal of surface layers of wax and delay the washing of resilient floors treated with metallic waxes. Removes scratches and signs.
BLUE DISC MARBEC | Light Abrasion
Disc for single-brush machine or washer-dryer, with light abrasive action for the extraordinary cleaning of stone and wood flooring.
Porcelain stoneware stain removal cleaning
- POWER DET diluted 1 part of product in 1-2 equal parts of water (e.g., 1 lt of product and 1 lt of water): for extraordinary stain-removing washes of heavily stained, haloed and dirty surfaces. <br> <br> How to use the product: <br> - Spread POWER DET generously with cloth on the surface;<br> - Work 4-5 square meters at a time;<br> - Leave on at least 10 minutes and do not let the product dry on the surface;<br> - Rub the surface with blue plastic fiber discs or pads; <br> - Pick up dirt residue and product with a microfiber cloth or vacuum cleaner;<br> - Finally, rinse 2 or 3 times with clean water until product and dirt are removed from the surface;<br> - Repeat application if necessary. <br> For the maintenance over time of surfaces cleaned with POWER DET, it is recommended to use the ordinary cleaning products GRES LINDO and GRES BRILL.<br> Yield:<br> - for extraordinary stain removal washes: 1lt / 30-60 sq.m.
Prodotti e accessori
POWER DET
Specific detergent for porcelain tiles for extraordinary cleaning to remove halos, stains, and any laying residues. It brings the material back to its original appearance.
BLUE BUFFER PAD | Light Abrasion
Polyester fibre pad to use for the removal of surface layers of wax and delay the washing of resilient floors treated with metallic waxes. Removes scratches and signs.
BLUE DISC MARBEC | Light Abrasion
Disc for single-brush machine or washer-dryer, with light abrasive action for the extraordinary cleaning of stone and wood flooring.
ADVICE FROM THE TECHNICIAN
Depending on your problem, check again the steps recommended by the technician and select the right products for you! For all your needs, do not hesitate to contact us, either by e-mail or on WhatsApp.
4.36€
BLUE BUFFER PAD | Light Abrasion
Polyester fibre pad to use for the removal of surface layers of wax and delay the washing of resilient floors treated with metallic waxes. Removes scratches and signs.
13.70€
BLUE DISC MARBEC | Light Abrasion
Disc for single-brush machine or washer-dryer, with light abrasive action for the extraordinary cleaning of stone and wood flooring.
